Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for CAN bus. It's discreet, doesn't use keys or LEDs and is concealed in the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting out their car. This guide will take you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system connects directly to your vehicle's ECU and is protected by a unique PIN code of your choice. It is undetectable by thieves using diagnostic scanners or other advanced methods. It cannot be disabled with circuit cuts.
The system is easy to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's security package.
To avoid an accidental deployment of airbags or short circuits The installer must first disconnect your battery. After that the installer is able to safely begin work. Basic hand tools are useful for making precise connections and a multimeter can be used to check electrical values and ensure safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring neat. The user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
It is essential to choose the right grounding spot that is free of dirt or paint during installation. Installers must also ensure that the immobiliser's wires, CAN H and CAN L are connected to the proper ECU ports. Based on the model, these wires may need to be soldered or plugged into. To ensure a secure and durable connection it is recommended you use a high-quality plug.
Once the install is complete, the customer can activate Transport Mode. This allows mechanics or valet parking to access the vehicle without having to know the pin code. To do this, the user must hit the service button on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's an excellent option for those who regularly rents out their vehicles through platforms such as Turo. Immobilisers can lower insurance costs, since it lowers the chance of theft.
Getting Started
If you are looking for a solution that will safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser . It prevents your car from running even if someone steals or copies your key. This is due to its advanced technology, which is designed to prevent the engine from running until the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle which allows it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence that only you can understand. This makes it impossible for anyone else to start your car. This is the best security system to protect your most precious possessions, keeping its value intact should you decide to sell it in the future.
Installing a ghost immobiliser can be an easy procedure, but it is crucial to follow the instructions carefully to avoid problems with the electrical system and malfunctions. You must first locate a power supply of 12V and a good grounding on the chassis of your car. Then, you can begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a strong connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to prevent short circuits of electricity.
Once the wires are connected, you can connect the battery and start the engine to test if the immobiliser is working. After you've verified that everything is working properly then you can put the immobiliser in a safe position inside the vehicle. Make ghost immobiliser and tracker to hide it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent for car thieves. It is invulnerable to key cloning and hacking and cannot be disabled without a code. It is simple to use and can be set up to a service valet setting so that your vehicle won't be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to stop theft of vehicles. It connects directly to the car's CAN bus network and communicates with the ECU, making it virtually undetectable as an addition to your vehicle. The Ghost Immobiliser does not interfere with the factory settings of your vehicle, unlike other aftermarket systems that require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. This is because the system doesn't transmit and receive radio frequency signals and it uses the CAN data format to communicate with your ECU. It doesn't require any modifications to your current key fobs.
To make use of the Ghost Immobiliser simply switch on the ignition in your car and enter your sequence for disarming (either one or two buttons). The indicator will flash two times to verify that you have entered the correct code. You are now able to start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking and will also protect the value of your most prized possession. If you ever have to surrender your car for service or valet parking The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need identify a source of constant power (12V) and a grounding point. Be sure that both are properly insulated and can be touched. It's also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of being tampered with by thieves. To avoid making mistakes, double-check these points and mark them with the use of tape or labels. It's recommended to examine all connections for signs of wear and tear. Make ghost car immobiliser that all connections are firmly in place, and properly sealed. Make sure to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit is working properly and that all connections and insulation are secure. If there are any issues, you must be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to stop unauthorised engine start. Its cutting-edge technology safeguards your vehicle from hacking, key cloning, and other typical tactics thieves employ to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unparalleled features, coupled with its discreet design makes it a preferred choice for drivers who love cars and security-conscious drivers.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow the steps of the installation process. Refer to the wiring diagram for the vehicle to aid you in locating and connecting the wires. You'll need to determine the grounding and power sources. Once these are found you'll need to mark them so that they are easy to locate when installing. It's essential to use high-quality materials and tools. Hand tools are essential to aid in making precise connections. A multimeter can verify electrical values, and ensure safety. Insulation tape and cable ties will keep the connections tidy and neat. A Ghost-specific user's manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. This step will confirm the immobiliser is working as it should and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine inspections of your vehicle to ensure the system is always functioning properly.
Once the installation has been completed, you can begin driving your car with confidence. The Ghost will help keep your car and its contents safe from would-be thieves and ensure that no one can drive off with your vehicle without the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts to steal or tamper with. This will allow you to locate your car if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA Installer who is registered This certification ensures that we follow strict guidelines and procedures for installing our products. This assures customers, insurance companies, and law enforcement that all installations are performed safely and in a correct manner.